Audi Q7 VIN Location (Gen 1, Gen 2, Gen 3) — Where to Find Your VIN

The Audi Q7 hides its VIN in a few fixed spots across all three generations. You need this number for VIN checks, service visits, or registration. Each generation keeps a similar layout, but some details change. This guide shows every Audi Q7 VIN location from Gen 1, Gen 2, and Gen 3, including the windshield, door jamb, engine bay spots, and digital readouts through the MMI system.

Gen 1 Audi Q7 VIN Locations (2006–2015)

Driver’s Side Door Jamb — Gen 1 Audi Q7

The Gen 1 Audi Q7 places one of its main VIN labels on the driver’s side door jamb. Open the driver’s door and look at the metal frame between the hinges and the B-pillar. The sticker sits at eye level or slightly lower, depending on the model year.

Audi uses a white or silver factory label here. It shows the VIN, build date, weight ratings, and model details. The print is clear and easy to read, even on older Q7s, unless the sticker has faded from heat or sun.

This spot is the quickest place to check the VIN because you don’t need tools or extra steps. Many inspections and ownership checks rely on this label, so it’s worth confirming the number here matches the VIN on the windshield and the VIN stored inside the MMI system.

If the sticker looks damaged or missing, Audi dealers can verify it using the other VIN points on the car.

MMI System — Gen 1 Audi Q7

The Gen 1 Audi Q7 lets you view the VIN directly through the MMI system. This is useful when the door sticker is worn or the windshield plate is hard to read. The VIN shown on the screen is stored in the car’s main control module, so it always matches the official factory number.

Turn the ignition on, then press the CAR button on the MMI panel. Use the control knob to scroll to Setup or Vehicle Settings, depending on the model year. Look for Service & Checks or Vehicle Identification. The full 17-digit VIN appears in that menu.

The screen gives a clean, easy-to-read version of the VIN without glare or dirt. It also confirms you’re working with the correct vehicle since the number comes from the internal system. This digital lookup helps during service visits or when you want to check the VIN quickly without opening doors or lifting covers.

Passenger-Side Floor Mat — Gen 1 Audi Q7

The Gen 1 Audi Q7 carries a stamped VIN plate under the passenger-side floor mat. This is a fixed metal plate welded into the body shell. It serves as a secondary, tamper-resistant VIN point.

Slide the passenger seat back for more room. Lift the floor mat and look for a small rectangular cover or carpet flap near the front edge of the footwell. Once you raise that cover, you’ll see the metal VIN plate set into the floor panel.

The digits are stamped directly into the chassis, so they won’t fade or peel like stickers. This location helps verify the car’s identity during detailed inspections or when other VIN labels are damaged. It’s also useful when checking a used Q7, since the floor VIN is much harder to alter.

You don’t need tools to reach it, but you may need to move the mat firmly if it hasn’t been lifted in years. This spot gives the most secure version of the VIN on a Gen 1 Q7.

Trunk VIN Area — Gen 1 Audi Q7

The Gen 1 Audi Q7 also has a VIN label inside the trunk. This spot acts as an extra reference point, especially useful during inspections or when comparing multiple VIN markings on the vehicle.

Open the tailgate and look at the right side of the trunk area. In most Gen 1 models, the VIN label sits under the trunk floor panel or on the side trim near the spare wheel compartment. Lift the floor cover to access the spare wheel well. You’ll see a white or silver service sticker with the VIN, option codes, and paint code details.

This label is protected from weather and sun, so it usually stays clean and readable even on older Q7s. It’s also harder to tamper with because it sits below the trim.

If you’re checking a used Q7, this trunk sticker helps confirm the car hasn’t been pieced together from damaged parts. The number should match the door jamb sticker, the windshield plate, and the VIN stored in the MMI system.

Gen 2 Audi Q7 VIN Locations (2016–2019)

Windshield — Driver’s Side — Gen 2 Audi Q7

The Gen 2 Audi Q7 places the VIN plate at the lower corner of the windshield on the driver’s side. You can see it from outside the car, looking through the glass near where the dashboard meets the base of the windshield.

The plate is a small metal tag fixed to the body. Audi etches the VIN deeply, so the digits stay clear even after years in the sun. You don’t need to open the door or turn on the ignition to check it, which makes this the main spot used during inspections, border checks, and roadside stops.

Make sure the area is clean. Dust or glare can hide the numbers, especially if the dashboard is dark. If the windshield has a heavy tint strip, lean in from the outside and angle your view downwards—the VIN sits just above the dashboard line.

This location is stable and easy to verify, so it should always match the door jamb sticker and the VIN stored in the MMI system.

Driver’s Side Door Jamb — Gen 2 Audi Q7

The Gen 2 Audi Q7 keeps its main VIN sticker on the driver’s side door jamb. Open the door and look at the inner frame between the hinges and the B-pillar. The label sits slightly lower than on the Gen 1, but it’s still easy to spot when the door is open.

Audi uses a clean white or silver sticker with the 17-digit VIN, build date, paint code, and weight ratings. The print is sharp and durable, so it stays readable even after years of use. This sticker is one of the most trusted VIN points on the vehicle because it’s tied directly to factory production.

Most inspections rely on this location since it’s quick to access. You don’t need tools or the MMI system—just open the door and check the label. When buying a used Q7, compare the door jamb VIN with the windshield plate and the MMI readout to confirm everything matches. Any mismatch is a red flag and should be checked further.

MMI Display — Gen 2 Audi Q7

The Gen 2 Audi Q7 lets you view the VIN directly through the MMI display. This is a quick way to confirm the number without checking any physical labels.

Turn on the ignition and press the MENU button. Use the control wheel to select Car or Vehicle. From there, go to Service & Checks and open Vehicle Information. The 17-digit VIN appears in this menu.

The MMI shows the VIN in clear text, so you don’t deal with glare, dust, or worn stickers. It also confirms the VIN stored in the vehicle’s control module, which should match the VIN on the windshield plate and the door jamb sticker.

If you’re checking a used car, comparing all three points—windshield, door jamb, and MMI—is a good way to spot tampering or mismatched parts. The MMI readout is reliable because it comes from the car’s internal system rather than a physical label.

Gen 3 / Facelift Audi Q7 VIN Locations (2020–Present)

Windshield — Driver’s Side — Gen 3 Audi Q7 (Facelift)

The Gen 3 facelift Audi Q7 keeps the VIN plate in the same familiar spot as the Gen 2. Look at the lower corner of the windshield on the driver’s side. The metal plate sits just above the dashboard line and is readable from outside the car.

Audi uses a clean, laser-etched plate that holds up well over time. The digits stay sharp, even with heavy sun exposure. Because it’s visible from outside, this is the first place most inspections check. You don’t need to unlock the car or start the engine.

If the Q7 has a darker dash or a tinted upper strip, angle your view downward through the glass to catch the numbers. A quick wipe of the windshield edge also helps, as dust can hide part of the VIN.

This location is the primary verification point on all modern Audi SUVs. It should always match the VIN on the door jamb sticker and the VIN shown in the updated MMI menu.

Driver’s Side Door Jamb — Gen 3 Audi Q7 (Facelift)

The Gen 3 facelift Audi Q7 places its main VIN sticker on the driver’s side door jamb, just like earlier models. Open the driver’s door and look at the inner metal frame between the hinges and the B-pillar. The sticker usually sits slightly below eye level, making it easy to read while standing outside the car.

Audi prints this factory label in white or silver with clear black text. It includes the 17-digit VIN, build date, weight ratings, and paint code. The sticker is durable and stays readable for many years because it’s protected from direct sunlight.

This door jamb VIN is one of the most reliable identity points on the vehicle. When buying a used Q7, compare it with the windshield VIN and the MMI VIN. All three should match. Any difference is a sign you need to investigate further.

MMI System — Gen 3 Audi Q7 (Facelift)

The Gen 3 facelift Audi Q7 also shows the VIN in the updated MMI system. This is one of the easiest ways to confirm the number because it’s clear, bright, and stored directly in the vehicle’s control unit.

Turn on the ignition and press the MENU or Home button, depending on the model year. Select Car or Vehicle from the on-screen menu. Then open Settings & Service or Service & Checks. Inside this section, choose Vehicle Information. The full 17-digit VIN appears on the screen.

The newer MMI system uses a sharper display than older generations, so the VIN is easy to read. There’s no glare, no dust, and no need to open doors. It’s a good confirmation point when checking a used Q7, as the digital VIN should always match the windshield plate and the door jamb sticker.

If you ever find a mismatch between these locations, stop and check the vehicle history before moving forward.

FAQ — Audi Q7 VIN Location (Gen 1–3)

Where is the VIN on an Audi Q7?

You can find the VIN on the windshield (driver’s side), the driver’s side door jamb, inside the MMI system, and in some Gen 1 models, under the passenger-side floor mat and in the trunk area.

Can I find the Audi Q7 VIN in the MMI menu?

Yes. All three generations display the VIN in the MMI system under Vehicle Information or Service & Checks.

Is the VIN always visible through the windshield on every Audi Q7?

Yes. Gen 2 and Gen 3 models always have the VIN plate on the lower driver’s side of the windshield. Gen 1 uses the same location in most trims.

Does the Audi Q7 have a VIN plate in the trunk?

Gen 1 does. You’ll find a VIN sticker under the trunk floor near the spare wheel. Gen 2 and Gen 3 usually don’t have a trunk VIN label.

Can the VIN be missing from the door jamb?

It shouldn’t be. If the sticker is missing, damaged, or replaced, check the windshield VIN and the MMI to confirm the car’s identity. Missing stickers are a red flag on used cars.

How do I check if the Audi Q7 VIN is real?

Make sure all VIN points match: windshield, door jamb, MMI, and for Gen 1, the floor VIN and trunk sticker. Then run a VIN check through a trusted service like ProVinDecoder.

Where is the VIN sticker on Audi SUVs?

Most Audi SUVs place the VIN sticker on the driver’s side door jamb. The Q7 follows this layout across all generations.

What should I do if the VIN on the windshield is faded?

Clean the glass edge first. If it’s still hard to read, compare the number with the door jamb sticker and the MMI readout. If all match, the VIN is valid. If not, inspect further or get a dealer to verify.