AUDI A5 Vin Location – Where to Find Your VIN Number

Need your AUDI A6 VIN location fast? You’ve got three main places to check. First is the driver’s side interior dash, visible through the lower corner of the windshield. Second is the driver door area, on the right side at the height of the front door hinges, where the VIN label sits on the jamb area. Third is under the hood in the engine bay, stamped on the right shock absorber dome. These are the quickest, most common spots you can verify in under a minute.

Once you find the 17-character VIN, don’t stop there. Use the Audi A5 VIN Decoder to confirm the car’s exact spec from the factory. It helps you validate the model, engine, trim, and key build details, so you’re not guessing when buying parts, checking paperwork, or spotting a swapped or mismatched VIN.

Windshield / driver’s side interior dash

The windshield VIN is the quickest one to check on an Audi A6. Stand outside the car on the driver’s side and look through the lower corner of the windshield, right above the dashboard. You’re looking for a small VIN plate or a printed strip with 17 characters. Tilt your head and change the angle if glare hides it. A phone flashlight helps at night, and a quick photo makes it easier to read without squinting.

This location is used because it’s easy to verify without opening anything. It’s also the one most people match first against the registration and insurance papers. If the plate looks tampered with, sits crooked, or the numbers look uneven, treat that as a warning. Then double-check the VIN in the door jamb and the engine bay stamp to be sure everything matches.

Driver door area VIN label

Open the driver door and look along the door jamb area, around the right side at the height of the front door hinges. On the Audi A6, the VIN here is usually on a factory label, not a stamped metal plate. It’s often white or silver, with the 17-character VIN plus extra info like weight ratings, paint codes, and build data. Wipe the area if it’s dusty, because one dirty corner can hide a character and mess up the whole number.

Engine bay VIN stamp (right shock absorber dome)

Pop the hood and go straight to the right shock absorber dome (right strut tower). That’s the round metal “dome” where the suspension top mount sits. On many Audi A6 models, the VIN is stamped into the metal in this area, sometimes on a flat section next to the dome rather than on the curved part. Use a flashlight and look from a few angles, because the stamp can be shallow and easy to miss under dust or light surface rust.

VIN match checklist

Start by matching the VIN in all three places: windshield (dash plate), driver door jamb label, and engine bay stamp. Read the VIN slowly, one character at a time. One wrong digit makes it a different car. Take a photo of each VIN and compare them side by side on your phone. It’s the easiest way to avoid mistakes.

Check the windshield plate for tampering. It should sit straight and look factory. Watch for scratched rivets, a loose plate, cloudy plastic, or a plate that looks newer than the surrounding dash. If the font looks odd or the plate is crooked, don’t ignore it.

Inspect the driver door label closely. This sticker should look like it’s been there since the car was built. Red flags include peeled corners, air bubbles, fresh glue marks, wrinkles, or a label placed slightly off. If the label looks “too new” for an older car, that’s worth questioning.

Look hard at the engine bay stamped VIN because it’s the toughest one to fake. The stamping should have even depth and consistent spacing. Red flags include grind marks, uneven metal texture, thick fresh paint over the area, or characters that don’t line up cleanly. Any sign of metal work near the stamp is a reason to walk away or get a proper inspection.

Finally, sanity-check the VIN format. It must be 17 characters and should not include the letters I, O, or Q. If any VIN spot is missing, unreadable, or doesn’t match the others, treat it like a serious problem. In that case, don’t rely on promises—verify with documents and use AUDI VIN Decoder before you do anything else.