Land Rover LR3 VIN Locations – Where to Find Your VIN

Land Rover LR3 VIN locations are easy to check once you know the spots: look at the driver-side windshield at the base of the dash (visible from outside), then open the driver door and check the driver-side B-pillar/door jamb sticker, and finally verify it on the RH chassis rail frame stamp behind the right-front suspension/mudguard area. After you find the number, run it through the Land Rover LR3 VIN Decoder(LINK) to confirm the exact model year, engine, trim, and factory specs—plus catch mismatched VINs before you buy parts or a used LR3.

Driver-Side Windshield

The Land Rover LR3 VIN on the driver-side windshield is on a small VIN plate at the base of the windshield, on the driver-side lower corner, visible from outside by looking through the glass at the dashboard edge.

Land Rover LR3 VIN Location on the Driver-Side B-Pillar (Door Jamb Sticker)

Open the driver’s door and look on the driver-side B-pillar / door jamb area. The VIN is printed on a sticker/label on the post.

VIN Location on the RH Chassis Rail (Frame Stamp)

Check the right-hand chassis rail for a VIN stamp. It’s behind the right-front suspension / mudguard area, stamped directly into the frame.

Quick Tips to Find and Verify Your Land Rover LR3 VIN

• Write all 17 characters. Don’t guess letters and numbers.
• Check all three spots. Windshield plate, door jamb sticker, and RH chassis rail stamp.
• All VINs must match. If one digit is different, stop and re-check.
• Avoid common mix-ups. 0 vs O, 1 vs I, 5 vs S.
• Use the chassis stamp for confirmation. It’s the best cross-check.
• Run the VIN in the Land Rover VIN Decoder to confirm year, engine, trim, and factory specs before parts or purchase.